Pneumatic Cylinder

Product Details:

Dealers & consulting provider of following 
1) pneumatic valves & fittings - (pneumatic cylinder , frl , solenoid valve , pu pipe , pu push fitting , pressure gauges etc. )
2) industrial valves -  (ball valve, butterfly valve, gate valve , globe valve , safety valve  etc. )
3) valve automation - (actuator butterfly valve , actuator ball valve,diaphragm type control valve etc. )
4) moisture separation unit -  (combo moisture separator, ms body moisture separator, electrical auto drain valve, mechanical auto drain valve, lip drain bowl etc. )
5) fitting - ( p u fitting , ss fitting , brass fitting , ms fitting , gi fitting)
6) steel -( plate , wire , sheet , angle sheet , patti , gi pipe , round bar, square bar , hex , rod shaft )
7) instrument - ( flow meter , sensoer , proxy switch , digital frequency  counter , transmeter , motor stainer )

festo /  janatics / smc  / jelpc / spac / techno / akari / rotexyuken  / pbi  / danfoss / indfos / legris / matrix / ckd / mindman camozzi /  baumer / mercurey / airtac / pneumax / la / akvalo air master / dutta / 
with regards ,

 

Additional Information:

• Item Code: 8412
• Production Capacity: 10
• Delivery Time: READY STOCK

Product Details:

Dealers & consulting provider of following 
1) pneumatic valves & fittings - (pneumatic cylinder , frl , solenoid valve , pu pipe , pu push fitting , pressure gauges etc. )
2) industrial valves -  (ball valve, butterfly valve, gate valve , globe valve , safety valve  etc. )
3) valve automation - (actuator butterfly valve , actuator ball valve,diaphragm type control valve etc. )
4) moisture separation unit -  (combo moisture separator, ms body moisture separator, electrical auto drain valve, mechanical auto drain valve, lip drain bowl etc. )
5) fitting - ( p u fitting , ss fitting , brass fitting , ms fitting , gi fitting)
6) steel -( plate , wire , sheet , angle sheet , patti , gi pipe , round bar, square bar , hex , rod shaft )
7) instrument - ( flow meter , sensoer , proxy switch , digital frequency  counter , transmeter , motor stainer )

festo /  janatics / smc  / jelpc / spac / techno / akari / rotexyuken  / pbi  / danfoss / indfos / legris / matrix / ckd / mindman camozzi /  baumer / mercurey / airtac / pneumax / la / akvalo air master / dutta / 
with regards ,

 

Additional Information:

• Production Capacity: 100
• Delivery Time: READY STOCK

Product Details:

As per ISO 6431 / CETOP RP43P, RP53P standards

• Adjustable cushioning at both ends
• Wide varieties of mountings
• Magnetic and non magnetic versions
• Long life
• Low friction

Product Details:

Keeping in mind ever-evolving requirements of our respected clients, we are offering a premium quality array of ADVU Compact Cylinder.

Product Details:

With our years of experience & in depth knowledge in this field, we are engaged in offering a quality-assured array of JELPC Standard Cylinder.

Product Details:

Features: 

• Conforms to ISO 15552 (VDMA 24562 and NFE 49-003-1)
• High performance, stability and reliability
• Polyurethane seals ensure efficient low friction operation and long life
• Switches can be mounted flush with the profile barrel

Product Details:

Being a leading firm in this industry, we are deeply engaged in offering a high quality range of Rodless Pneumatic Cylinder.

Product Details:

Features:

• Concentrates wiring and piping on one side: Allows more efficient installation, since four directions can be used freely.
• Allows installation from four directions???ø4 to ø10???
• With counterbore for mounting (ø12 to ø20): 2 kinds of bodies are available.There is no protrusion for a mounting bolt.
• Two auto switches can be installed even for a 4 mm stroke.
• Easy seal replacement: Seals can be replaced easily by just removing the rod cover (ø4 to ø10) or retaining ring (ø12 to ø20).
• With boss (h9) (ø4???ø10): Centering can be done easily.
• Clean room compliant Clean Series (except ø4)
• Standard equipment with damper (ø12 to ø20)
• RoHS compliant

Product Details:

The latest in the Norgren ISO/VDMA pneumatic cylinder range is offered in both profile and tie-rod options, features the self adjusting, Adaptive Cushioning System (ACS) as standard. The range is complemented by one of the most comprehensive range of mountings in the industry, switches including IO Link and options including high temperature or low friction and various piston rod materials.

Product Details:

Product Features

• The seal of piston adopts heterogenous two way seal structure.It's dimension is tight and it has the function of oil reservation.
• It is no tie rod cylinder. The cylinder barrel is "Mickey Mouse" shape, and have good corrosion.
• Compared with ISO1552 standard cylinder, SU series cylinder with the same bore size is shorter.
• The buffer adjustment of cylinder is smooth and steady.
• Mounting accessories are the same as SC series.
• The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150???.

Product Details:

Tube I.D. φ40, 50, 63, 80, 100, 125, 150, 200 (mm).  Designs of oil-filled alloy. special housing and bushing provide the needed self-lubrication of piston rod.

Product Details:

MH Series Grippers have two types. One is parallel gripper, the other is point gripper. As to the acting type we have double acting, single extend acting, single return acting etc.The bore size is from 6mm to 40mm.Normally it is with magnet. The maximum operating frequency is 180c.p.m. For its excellent quality, the cylinder widely used in industrial automation systems.

• Standard parallel type air gripper
• Bore sizes from 10mm to 40mm
• Double acting and Single acting available
• Auto switch capable
• Improved rigidity of guide rail
• The MHZ2 series is a standard type parallel air gripper, taking the place of the MHQ (G) 2 series.
• A linear guide provides high rigidity and high accuracy.
• MHZ2 can operate under higher pressure even at a larger holding point and overhang.
• High degree of mounting precision is achieved and mounting repeatability is improved.

MHY MHZ MHC  is a compact 180-degree angular gripper. Its size and mass allow for small, lightweight tooling, while delivering large gripping forces via piston/cam design. The Air Gripper gives you maximum installation flexibility with mounting options on 4 sides and recessed auto switch grooves on either side of the gripper. Precision reference points on body and fingers are standard.


Features:

• Light and compact size in small
• Its size and mass allow for small, lightweight tooling, while delivering large gripping forces
• 180° Angular Style Air Gripper, retractable simplify pick and place action.
• Built-in magnet type,can be mounted magnetic switch.
• Most of specially designed, use under special circumstances, fingers opening and closing.

Additional Information:

• Delivery Time: ready stock

Product Details:

The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation. ... There are magnetic switch slots around the cylinder body, which is convenient to install sensor switch.

Compact pneumatic cylinder, double acting, 32mm Bore, 15mm Stroke, with Magnet, Female thread, PT thread type

• Riveted structure is adopted to connect the cylinder body and back cover, and piston and piston rod to make it compact and reliable.


• The inner diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.


• The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.


• Compact structure can effectively save installation space.


• There are magnetic switch slots around the cylinder body, which is convenient to install sensor switch.


• Mounting accessories with various specification are optional.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Features of DNC pneumatic cylinder (air cylinder) :*Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safety and with low noise. *With self-lubricating bearing, the piston rod is lubrication free. ... ** Bore≥125mm,the dimension is the same as ISO6431 Tie-Rod cylinder.
 Piston rod can be held or clamped in any position Piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure or leaks in the system
 Mechanical locking when the end position is reached Lock is only automatically released when pressure is supplied to the cylinder End-position locking at one or both ends

The standard cylinder DNC can be ordered using either a fixed part number and type designation or via the modular product system. The type code listed above only applies to the DNC standard cylinder with fixed part number and type designation. Variants can only be ordered using the modular product system

Additional Information:

• Delivery Time: READY STOCK

Product Details:

We have best range of pneumatic compact cylinder in advu model as we have in festo as well as equvivalent make also so we provide fast deliver and best quality

Product Details:

Double-acting cylinders (DAC) use the force of air to move in both extend and retract strokes. They have two ports to allow air in, one for outstroke and one for instroke. Stroke length for this design is not limited, however, the piston rod is more vulnerable to buckling and bending. Additional calculations should be performed as well.
Telescoping cylinders, also known as telescopic cylinders can be either single or double-acting. The telescoping cylinder incorporates a piston rod nested within a series of hollow stages of increasing diameter. Upon actuation, the piston rod and each succeeding stage "telescopes" out as a segmented piston. The main benefit of this design is the allowance for a notably longer stroke than would be achieved with a single-stage cylinder of the same collapsed (retracted) length. One cited drawback to telescoping cylinders is the increased potential for piston flexion due to the segmented piston design. Consequently, telescoping cylinders are primarily utilized in applications where the piston bears minimal side loading

Product Details:

A pneumatic cylinder is a mechanical device that creates a linear motion by converting energy from compressed air. Common pneumatic cylinders follow global standards for inter-changeability and the two most common standards are ISO 6432 for mini round cylinders (Ø 8-25 mm) and ISO 15552 for profile cylinders (Ø 32-320 mm). Pneumatic cylinder accessories are used for mounting or for coupling it to a load. Some accessories are included in ISO 6432 and ISO 15552, so they can be interchanged with any brand. However, they can be used with non-ISO cylinders if the mounting specifications match. Mounting accessories will affect system performance, reliability, and overall design. Based on the intended function and system requirements, the correct mounting accessories can be selected.
The three different main cylinder mounting styles are: fixed centerline mount, fixed offset mount, and fixed pivot mount. Depending on the needed function of the pneumatic cylinder and application, the correct mounting accessory can be selected.
Clevis attachments can be mounted directly to the cap-end and are bolt mounted to the cylinder. Depending on the coupling the clevis will mount to, a female or male style coupling can be used. The bolts securing the clevis attachment to the cylinder is designed to handle the shear forces generated from the opposing forces generated during cylinder actuation. In applications where slight misalignment is expected a spherical bearing can be used to relieve the rod of stress.

Additional Information:

• Delivery Time: READY STOCK

Product Details:

Being one of the renowned firms in the industry, we are decidedly involved in providing a premium quality array of ADN Compact Air Cylinder.

Product Details:

With a firm commitment to quality, our organization is involved in offering a wide ambit of Festo Cylinder.

Product Details:

Rotary vane principle, infinitely adjustable swivel angle. The stop system is separate from the rotary vane so that any forces which occur are absorbed by the stop cams and cushioned via flexible plastic pads. Modern alternatives can be found by entering the first four characters of the type code in the search field.